MSI MS-6741 GRAPHICS DRIVER DOWNLOAD

MSI MS-6741 GRAPHICS DRIVER DOWNLOAD

The plastic clip at each side of the DIMM slot will automatically close. The module will only fit in the right orientation. Serial Numbers are recorded for security purposes. Please turn off the power and unplug the power cord before installing the CPU. Floppy Disk Drive Connector: I have tried upgrading the bios, flashing it from a win 98 boot disk, following the instructions on this page http:

Uploader: Dozilkree
Date Added: 13 December 2008
File Size: 6.25 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 68345
Price: Free* [*Free Regsitration Required]

Please login or register.

Opening a case just slows the resolution process down. Delivery options see all. You can install either single- or double-sided modules in any order to meet your own needs. Position the heatsink onto the retention mechanism. Connect the fan power cable from the mounted fan to the 3-pin fan power connector on the board.

Please provide a valid price range. Otherwise, the Line-Out connector on the back panel will not function.

Memory modules can be installed in any combination as follows: AGP is an interface specification designed for the throughput demands of 3D graphics.

Skip to main content. Hardware Setup Hardware Setup This chapter tells you how to install the CPU, memory modules, and expansion cards, as well as how to setup the jumpers on the mainboard.

  DV6646US AUDIO DRIVER DOWNLOAD

Press the CPU down firmly into the socket and close the lever.

MSI MS Specifications |

The mobo recognises it fine, but when i get to the xp setup to select disks and partitions it says ‘no disk available’. The only difference when i turned it on was that it said ‘CMOS settings wrong’. Follow the instructions below to clear the data: The motherboard is supplied with IO plate.

I restarted, went into the bios and the bios version hadn’t changed.

MSI Ms K8mm-ilsr Ver 1 Socket Motherboard With BP | eBay

Floppy Disk Drive Connector: Home Help Search Login Register. You can clear CMOS by shorting pin while the system is off. Then return to pin position. Before inserting the power supply connector, always make sure that all components are installed properly to ensure that no damage will be caused. PO, Isles of Scilly: Avoid clearing the CMOS while the system is on; it will damage the mainboard.

MSI Ms-6741 K8mm-ilsr Ver 1 Socket 754 Motherboard With BP

Then push it in until the golden finger on the memory module is deeply inserted in the socket. Its all good now! Please note that any violation of the mms-6741 installation procedures may cause permanent damages to your mainboard. Overheating Overheating will seriously damage the CPU and system, always make sure the cooling fan can work properly to protect the CPU from overheating.

  CITIC PB2 PASSBOOK PRINTER DRIVER DOWNLOAD

Mount the fan on top of the heatsink. Please turn off the power and unplug the power cord before installing the CPU.

When you are installing the CPU, make sure the CPU has a heat sink and a cooling fan attached on the top to prevent overheating. All Auction Buy it now. This is a used motherboard.

Press the two levers down to fasten Ks-6741 down the fan until its four clips get wedged in the holes of the retention mechanism. So after some swearing I decided to copy the data off the data disk and use a disk the BIOS was recognising.